5 Series E39 528i (M52) SAL
65 77 016
Removing and installing airbag control unit
Warning!
Note airbag safety instructions!
Incorrect handling can activate airbag and cause injury.
Disconnect battery negative lead and cover.
Press ventilation grill (1) upwards slightly, lift out cup holder (2)
to side and remove.
Slide ventilation grill downwards and remove.
Version with bore hole (2):
Release screws (1) and (3); in version with eject box, release
screws (1) only.
Raise complete center armrest.
Version without bore hole (2):
Remove center console.
RA Removing and installing airbag control unit
BMW AG - TIS
22.02.2013 05:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
