bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Removing And Installing_replacing Left Headlight Vertical Aim Adjuster (xenon He|Page 2929 > < 2 RA Removing And Installing_replacing Left Headlight Vertical Aim Adjuster (up To 09|Page 2927
Page 1
background image

67 16 011

Removing and installing/replacing left
headlight vertical aim adjuster (xenon
headlamp, up to 09/2000)

Remove lens/reflector.

Warning!

Follow instructions for handling light bulbs (exterior lights).

Turn plug connection (1) in direction of arrow and disconnect.

Remove low beam cover (2).

Turn side-marker lamp bulb holder (3) in direction of arrow and
remove.

Turn plug housing (4) in direction of arrow and remove.

Remove high beam cover cap (5).

Installation:

Make sure low beam cover (2) and high beam cover cap (5) are
correctly seated.

Fully release adjusting screws (6).

From 01/1997:

In addition, turn lower holder through approx. 90

°

 and lever out at

headlight vertical aim adjuster underneath.

All:

Pull insert (1) in direction of arrow out of headlamp housing (2).

RA  Removing and installing/replacing left headlight vertical aim adjuster (xenon he

BMW AG - TIS

22.02.2013  05:19

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Removing And Installing_replacing Left Headlight Vertical Aim Adjuster (xenon He|Page 2929 > < 2 RA Removing And Installing_replacing Left Headlight Vertical Aim Adjuster (up To 09|Page 2927