5 Series E39 528i (M52) SAL
View of mounting bolt on A-pillar with end fitting of ITS head
airbag
1.
End fitting of ITS head airbag
2.
Lock washer
3.
Mounting bolt on A-pillar
Note:
A-pillar bracket at bottom was fitted up to 09/98 only.
Unscrew bolt (1).
Push bracket at bottom of A-pillar upwards (2).
Remove bracket at bottom of A-pillar towards front (3).
Installation:
Tightening torque,
refer to Technical Data 72 12 3AZ
During installation, ensure that retaining lug is correctly seated
in body.
View, bracket at bottom of A-pillar
1.
Bore for retaining screw in body
2.
Retaining bore for retaining lug of bracket at bottom of A-pillar
in body
Important!
The retaining clip (2) of the trim for front roof pillar is located in
the area of the
bracket, A-pillar, bottom (1).
RA Removing and installing / replacing left or right ITS head airbag (model without
BMW AG - TIS
22.02.2013 05:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -
