5 Series E39 528i (M52TU) SAL
16 14 010
Removing and installing/replacing fuel pump
Suck the fuel out of the fuel tank,
refer to 16 00 005
Remove right sensor for fuel level indicator,
refer to 16 12 000
Unfasten plug connection (1) on the fuel pump.
Unfasten cable clip (2).
Unfasten hose clip (3) on fill level sensor, carefully remove spiral
hose and avoid damaging the connection neck.
Installation:
Locate cable tie (2) on the white position marks, tighten down
and cut to length as required.
Installation:
Align spiral hose (spare part black with white position marks)
and cable (2) between fuel level sensor (1) and fuel pump (3)
before installation to prevent torsional stresses.
White position marks on the spiral hose for location of cable
ties and assembly position on fuel level sensor.
RA Removing and installing/replacing fuel pump
BMW AG - TIS
20.02.2013 07:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
