5 Series E39 528i (M52TU) SAL
Support transmission with special tool 00 2 030 / 24 5 301 /
24 5 304.
Release screws and remove cross-member (1).
Installation:
Tightening Torque,
refer to Technical Data 24 71 1AZ / 2AZ.
Unfasten screws.
Installation:
Replace self-locking nuts.
Tightening Torque,
refer to Technical Data 26 11 1AZ.
Grip propeller shaft and release nuts.
Bend propeller shaft downwards at center mount (1), detach from
transmission output flange and tie back to one side on underbody
of vehicle.
Installation:
Tightening Torque,
refer to Technical Data 26 11 6AZ
RA Replacing radial seal for output flange (A5S 325Z)
BMW AG - TIS
20.02.2013 08:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -