5 Series E39 528i (M52TU) SAL
-
Connect new servodrive (2)
-
Check function
-
If servodrive is running, gear is O.K.
-
Reassemble front seat
(B) Actuator drive running:
-
Transmission for longitudinal seat adjustment defective!
-
Continue with
Disassembly of faulty gear for longitudinal seat adjustment
Disassembly of faulty gear for
longitudinal seat adjustment:
Cut through drive shaft (1) with a large bolt cutter or pneumatic
saw.
Remove drive shaft (1) from gear (2).
Release nuts (3) and detach gear (2).
If necessary, remove gear on other side of seat runner.
The front seat can now be moved.
Remove inside panel from seat rail.
If necesary, detach hose from lumbar support pump.
Screw seat runners at front to seat frame
for removal only.
Release screws from floor panel
and remove front seat.
Replace both seat runners,
refer to 52 17 010.
RA Additional work (normal/ electric) with defective drive for longitudinal adjustm
BMW AG - TIS
20.02.2013 15:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -