5 Series E39 528i (M52TU) SAL
Caution!
Do not bend windshield wiper arm when removing it (risk of
breakage!).
Release nut and remove windshield wiper arm.
Installation:
Tightening torque, 61 61 10AZ
If necessary, detach adjusting disk (1) with special tool
61 6 060 .
Installation:
Screw adjusting disk (1) together with wiper arm onto shaft.
Check contact angle to windshield with special tool 00 9 230 .
If necessary, correct contact angle through displacement of wiper
arm on adjusting disk.
Passenger side:
Remove caps.
Unscrew nuts.
Installation:
Tightening torque, 61 61 10AZ
RA Removing and installing/replacing both windshield wiper arms
BMW AG - TIS
20.02.2013 17:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -