5 Series E39 528i (M52TU) SAL
64 12 770
Removing and installing/replacing
changeover valve for latent heat accumulator
Remove left front wheel and left wheel arch trim.
If necessary, remove plastic cover from valve unit
Disconnect hoses (1), unfasten hose clip (2) and pull off hoses.
Pull off connectors.
Slide valve unit upwards and lift forwards to remove.
RA Removing and installing/replacing changeover valve for latent heat accumulator
BMW AG - TIS
20.02.2013 18:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -