5 Series E39 528i (M52TU) TOUR
Unlock luggage compartment loading floor (1) and pull out 10 mm.
Only the O-ring (1) of rollers (2) may remain in contact and it must
still be possible to turn the rollers (2) (by hand); if this is the case,
the vertical clearance (F) is correctly adjusted.
Note:
If one of the two rollers (2) cannot be turned, press down the
"middle" roller block on the relevant side until the rollers (2)
can be turned.
Raise luggage compartment loading floor (4) and secure with bar.
First tighten two hexagon screws (1) on roller block at "center" (3),
then tighten screws (2) (8.5 Nm).
Pull out luggage compartment loading floor (1) and tighten
screws (2) (8.5 Nm).
RA Adjusting luggage compartment loading floor (pull-out) (touring)
BMW AG - TIS
20.02.2013 22:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -