5 Series E39 530d (M57) SAL
Route adapter wire set (a) to the central engine compartment
bulkhead and on through rubber seal (1). Seal the bushing.
Feed adapter wire set (a) through bellows (2) and into electronics
box (3). Seal the bushing.
Secure adapter wire set (a) with cable ties at a suitable point.
Open the middle connector X2413, disconnect pins 20, 33 and 35
and tie back.
Connect the wires of adapter wire set (a) to the pins as follows:
BRGN (brown/green) wire to pin 20
BLSW (blue/black) wire to pin 33
WSGE (white/yellow) wire to pin 35
Close the connector.
SI Installation instructions for adapter wire set, E39 M57
BMW AG - TIS
20.02.2013 08:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
