bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

6 RA Removing And Installing Engine (M57)|Page 581 > < 5 RA Checking Compression In All Cylinders (M47 _ M57 _ M47TU)|Page 579
Page 1
background image

11 00 050

Removing and installing engine (M57)

Instructions for disconnecting and connecting battery,

refer to General Information MG12.

Disconnect negative battery lead.

Remove underbody panelling.

Remove radiator cowl,

refer to 17 11 031.

Caution!

When working on the oil, coolant or fuel circuit, you must
protect the alternator against contamination.

Cover alternator with suitable materials.

Failure to comply with this procedure may result in an
alternator malfunction.

Caution!

If the charge air hoses are not fitted without grease and dry,
this will result in supercharger failure.

Fit charge air hoses without grease and dry.

Release screws (1).

Remove air duct (2).

RA  Removing and installing engine (M57)

BMW AG - TIS

20.02.2013  11:30

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

6 RA Removing And Installing Engine (M57)|Page 581 > < 5 RA Checking Compression In All Cylinders (M47 _ M57 _ M47TU)|Page 579