5 Series E39 530d (M57) SAL
Note:
Rotate camshafts at hexagon drive.
Rotate camshafts until cam tips of inlet and exhaust camshafts of
1st cylinder point to each other.
Insert tensioning rail from above and screw down with a new
bearing pin (1).
Insert guide rail from above and screw down with a new bearing
pin (2).
Tightening torque, 11 31 12AZ.
Align inlet camshaft and secure with special tools 11 6 321
and 11 6 322 in firing TDC position of first cylinder.
RA Removing and installing cylinder head (M57)
BMW AG - TIS
20.02.2013 11:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 14 -