5 Series E39 530d (M57) SAL
For a better overview, this work step is shown without the vacuum
pump.
Place special tool 11 6 321 on inlet camshaft.
Note:
Special tool 11 6 321 must lie flush on cylinder head.
For a better overview, this work step is shown without the vacuum
pump.
Place special tool 11 6 321 on exhaust camshaft.
Note:
Special tool 11 6 321 must lie flush on cylinder head.
If necessary, adjust camshaft timing.
RA Checking camshaft timing (M57)
BMW AG - TIS
20.02.2013 11:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -