5 Series E39 530d (M57) SAL
13 62 520
Removing and installing/replacing pedal
travel sensor (M47, M57 and M67)
Turn off ignition.
Remove trim panel for instrument panel at bottom left.
Note:
Connect DIS or MoDiC.
Select diagnostic program of DDE control unit.
Check function of pedal travel sensor (function test).
Read fault memory. To proceed, follow DIS or MoDiC
instructions.
Location:
The pedal travel sensor (1) is fitted to the pedal block.
Unscrew and remove control module (1) from bracket.
Release screws (2).
Remove bracket.
RA Removing and installing/replacing pedal travel sensor (M47, M57 and M67)
BMW AG - TIS
20.02.2013 12:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
