5 Series E39 530d (M57) SAL
Release nut.
Installation:
Install screw and nut, do not tighten down.
Comply with installation sequence.
Replace self-locking nuts.
Release nuts on left and right.
Lower final drive and lever out of flange of propeller shaft.
Installation:
Install screws, do not tighten down.
Comply with installation sequence.
Replace self-locking nuts.
RA Removing and installing or replacing final drive (HIGH)
BMW AG - TIS
20.02.2013 15:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
