5 Series E39 530i (M54) TOUR
13 71 000
Removing and installing intake filter housing
(M54)
Turn off ignition.
Remove air duct (1).
Release clamp (2).
Detach screw connection of intake filter housing on body.
Detach vacuum hose (1) from intake hose (3).
Release clamp (2).
Unlock plug (4) and detach from air-mass flow sensor.
Remove intake hose (3) from connecting piece and resonator.
Remove intake filter housing.
Installation:
Insert guide pin and rubber mount in holder.
Insert intake pipe in intake hose.
RA Removing and installing intake filter housing (M54)
BMW AG - TIS
20.02.2013 13:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
