5 Series E39 530i (M54) TOUR
Remove front splash guard.
Open drain plug (1) at bottom of radiator.
Installation:
Replace seal.
Drain, catch and dispose of coolant.
Open drain plug on engine block.
Installation:
Replace seal.
Tightening torque, 11 11 5AZ.
Drain, catch and dispose of coolant.
Adding coolant:
Note:
Slowly fill coolant expansion tank with coolant.
Screw in vent plug when bubble-free coolant emerges.
Pour coolant into coolant expansion tank up to max. cold fill level.
Note:
The tank mark indicates the fluid level at approx. 20
°
C.
Use only recommended coolant.
Vent cooling system and check for leaks.
RA Draining off and topping up coolant (M54)
BMW AG - TIS
20.02.2013 13:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
