5 Series E39 535i (M62) SAL
Caution!
When fitting cylinder head, press oil separator outwards.
Fit cylinder head and install new cylinder head screws.
Do not wash off screw coating.
Note:
Use special tool 00 9 120 as a torsion angle bracket.
Tighten down cylinder head screws in sequence 1 ... 10.
Tightening Torque,
refer to Technical Data 11 12 8AZ.
Ensure that oil return pipe is correctly seated in oil separator.
RA Removing and installing left cylinder head (M62 up to 9/98)
BMW AG - TIS
20.02.2013 11:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
