5 Series E39 535i (M62) SAL
Align all camshafts with open-end wrench in such a way that
special tools 11 2 441 / 445 / 446 / 442 locate firmly
against cylinder heads.
Caution!
Do not damage the cylinder head.
Fit special tool 11 2 443 to special tool 11 2 445 / 441 and
secure with special tool 11 2 444 using the spark plug thread.
Fit special tool 11 2 443 to special tool 11 2 446 / 442 and
secure with special tool 11 2 444 using the spark plug thread.
Crank engine from the 45
°
before TDC position in direction of
rotation up to TDC position.
Hold crankshaft in TDC position with special tool 11 2 300.
Caution!
Remove special tool 11 2 300 before starting engine.
RA Removing and installing right cylinder head (M62 up to 9/98)
BMW AG - TIS
20.02.2013 11:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
