5 Series E39 535i (M62) SAL
11 36 590
Removing and installing/replacing solenoid
valve of camshaft adjustment unit, right
(M62 VANOS from 9/98)
Remove intake filter housing with air-mass flow sensor.
Release screws on sealing flange.
Note:
The sealing flange seals the timing case cover via the
solenoid valve.
If necessary, clean solenoid valve with a cloth.
Remove sealing flange (1).
Note:
Once it has been removed, oil drips from the solenoid valve.
Have a cleaning cloth ready.
Make sure no oil drips onto the belt drive. Remove any
remnants of oil immediately with cleaning cloth.
Release solenoid valve with special tool 11 6 420.
RA Removing and installing/replacing solenoid valve of camshaft adjustment unit, ri
BMW AG - TIS
20.02.2013 12:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -