5 Series E39 535i (M62) SAL
Disconnect plug connection on rear of water box (1 to 3).
(1)
Temperature sensor for coolant for DME (white)
(2)
Temperature sensor for remote thermometer (black)
(3)
Ground connection of ignition coils (terminal 4a)
Ground connections (1), unfasten nuts.
Unclip diagnosis connector (2) from bracket.
Unfasten ignition coil connections (3).
Unfasten screws on cable ducts.
Remove cable ducts from brackets.
Unfasten screws in cover of electronics box.
Tightening torque: 4.4 Nm
RA Replacing wiring harness section for engine (M60, M62)
BMW AG - TIS
20.02.2013 12:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -