5 Series E39 535i (M62) SAL
Installion location of fuel pressure regulator:
On the rear suction unit beside the electronics box.
Fuel pressure regulator shown here on removed engine.
Remove vacuum hose.
Remove circlip.
Note position of vacuum connection.
Turn fuel pressure regulator and pull out.
Installation:
Replace sealing rings (1 and 2).
Ensure sealing faces are clean.
RA Replacing fuel pressure regulator (M62)
BMW AG - TIS
20.02.2013 13:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
