5 Series E39 535i (M62) SAL
13 71 000
Removing and installing suction-filter
housing (M60, M62)
Disconnect plug connection (1) from mass air flow sensor.
Unfasten hose clip (2).
Pull off hose.
E38 M62: Disconnect plug connection on temperature sensor for
intake air.
Open clips (1).
Remove air-mass sensor.
Installation:
Replace gasket (1) between mass air flow sensor and upper
section of air filter.
To facilitate assembly, coat gasket with acid-free grease.
M60 B30:
Loosen hose clamp.
Pull off hose.
RA Removing and installing suction-filter housing (M60, M62)
BMW AG - TIS
20.02.2013 13:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -