5 Series E39 535i (M62) SAL
Installation:
Ensure that base support is correctly located in fuel baffle.
Compress retaining hook on fuel pump (black housing).
Remove fuel pump from fuel baffle (white housing).
Installation:
Ensure that both retaining hooks locate perfectly. Check that
O-ring is perfectly located on intake neck. If necessary, locate
accurately by applying gentle pressure.
Disconnect both plug connections (1) from the fuel pump.
Unfasten hose clip (2) and carefully remove spiral hose, avoiding
damage to pump neck.
Installation:
Align spiral hose (spare part black with white position marks)
and cable (2) between fuel level sensor (1) and fuel pump (3)
before installation to prevent torsional stresses.
White position marks on the spiral hose for location of the
cable ties and assembly position on the fuel pump.
RA Removing and installing/replacing the sensor for the fuel level gauge (right)
BMW AG - TIS
20.02.2013 13:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -