5 Series E39 535i (M62) SAL
Caution!
Do not let propeller shaft fall into joints.
Joints and rubber sleeve can be damaged on constant
velocity joint.
Bend propeller shaft downwards at center bearing, remove from
transmission output flange and tie up to one side with a thread or
wire.
Unfasten screws.
Installation:
For tightening torque,
refer to Technical Data 24 11 1AZ
Pull off transmission extension (1).
Installation:
Replace O-ring (2).
For ease of installation, coat O-ring with Vaseline.
RA Removing and installing transmission extension (A5S 440Z)
BMW AG - TIS
20.02.2013 14:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -