5 Series E39 535i (M62) SAL
24 12 017
Replacing radial seal for output flange (A5S
440Z)
Remove transmission extension,
refer to 24 11 057.
Clamp special tool 24 1 220 in a vise and drive three thin dowel
pins in with a plastic hammer.
Note:
After completion of work, return dowel pins to their original
position.
Fit transmission extension (1) to special tool 24 1 220.
Unfasten peening on grooved nut (2).
Installation:
Peen grooved nut (2).
Unfasten grooved nut (1) with special tool 24 4 110.
Installation:
Replace grooved nut (1).
Tightening torque,
refer to Technical Data 24 13 1AZ.
RA Replacing radial seal for output flange (A5S 440Z)
BMW AG - TIS
20.02.2013 14:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -