5 Series E39 535i (M62) SAL
31 12 092
Removing and installing or replacing both
traction struts
Caution!
Always install or replace traction strut bearings in pairs.
Unscrew and remove splash guard.
Unfasten nut.
Unfasten stabilizer mount on front axle support.
Remove screw (1) and turn steering onto lock if necessary.
Installation:
Replace self-locking nut.
Tightening Torque,
refer to Technical Data 31 12 13AZ
Mark the installation position of the spring strut tube (1) in the
swivel bearing (2) with paint - never mark with scribing tool.
Marking is not required if the factory mark is still identifiable.
R = installation position of right spring strut tube
L = installation position of left spring strut tube
Version with factory marking above the swivel bearing.
RA Removing and installing or replacing both traction struts
BMW AG - TIS
20.02.2013 15:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -