5 Series E39 535i (M62) SAL
Version with factory marking above the swivel bearing.
Unfasten nut.
Expand swivel bearing with special tool 31 2 200 and pull
swivel bearing downwards.
Installation:
Press swivel bearing upwards to stop with workshop hoist and
note marking of installation position.
Replace self-locking nut. Tightening Torque,
refer to Technical Data 31 21 4AZ.
Unfasten screws and remove wheel bearing.
Installation:
Contact face (2) of wheel bearing and swivel bearing and the
threaded bores (1) must be clean and free of grease.
Tightening Torque,
refer to Technical Data 31 21 5AZ.
RA Replacing front wheel bearing (wheel hub) (high)
BMW AG - TIS
20.02.2013 15:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -