5 Series E39 535i (M62) SAL
32 31 241
Replacing adjusting lever for steering column
Remove upper section of the steering column panelling,
refer to 32 31 003.
Remove the lower section of the steering column panelling,
refer to 32 31 020.
Remove the wood panelling and the left panelling for the
glove compartment.
Disconnect torsion springs (8) from both sides.
Slacken nut (1).
Remove axial grooved ball bearing (2) and clamping disc (3).
Remove retainer (4).
Press clamping fixture (9) out of adjusting lever (5) with special
tool 32 1 200 and insert 32 1 204.
Grip drive of special tool with open-end wrench.
RA Replacing adjusting lever for steering column
BMW AG - TIS
20.02.2013 15:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -