5 Series E39 535i (M62) SAL
Caution!
Before locking, ensure that trunk lid is not able to damage the
body or the rear window.
If necessary, first roughly cut the trunk lid to size.
Carefully close trunk lid and adjust to fit side panels.
Open trunk lid, taking care not to alter the adjustment.
Tighten down screws (1, 2) on lower section of trunk lid lock.
Close trunk lid and check adjustment, repeating if necessary.
Open trunk lid.
1. Check fulcrum pads on lower section of trunk lid lock for
damage and replace if necessary.
2. Close trunk lid.
Adjust gap of rear lid to tail panel.
Gap min. 5 mm.
Rear lid may protrude 0.5 mm over side walls.
RA Adjusting trunk lid to fit
BMW AG - TIS
20.02.2013 19:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
