5 Series E39 540i (M62) SAL
11 12 106
Removing and installing right cylinder head
(M62 up to 9/98)
(Cylinder bank 1-4)
Remove right exhaust manifold,
refer to 11 62 143.
Unfasten drain plug for coolant on right engine block.
Drain and dispose of coolant.
Installation:
Replace sealing ring.
Tightening Torque,
refer to Technical Data 11 11 5AZ.
Vent cooling system and check for leaks,
refer to 17 00 039.
Remove both cylinder head covers,
refer to 11 12 004.
Remove spark plugs,
refer to 12 12 011.
Remove fan clutch with impeller,
refer to 11 52 020.
Remove coolant manifold,
refer to 11 53 325.
Remove oil lines on left and right of cylinder head.
RA Removing and installing right cylinder head (M62 up to 9/98)
BMW AG - TIS
20.02.2013 11:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
