bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Removing And Installing_replacing Upper Section Of Oil Pan (M62)|Page 617 > < 1 RA Removing And Installing_replacing Upper Section Of Oil Pan (M62)|Page 615
Page 4
background image

Lift engine with special tool 00 0 200 approx. 6 - 8 mm.

Remove lower section of oil pan,

refer to 11 13 020

Relieve load on drive belt of air conditioner and remove adjusting
plate from oil pan,

refer to 11 28 050

Unfasten vane pump,

refer to 32 41 060

Note:

Lines remain connected. If necessary, remove stud bolt from
upper section of oil pan and tie vane pump to one side.

E38

Unfasten protective tube on positive battery lead from oil pan and
unfasten from right engine support.

Unfasten positive battery lead from starter motor and unfasten
from left retaining bracket.

RA  Removing and installing/replacing upper section of oil pan (M62)

BMW AG - TIS

20.02.2013  12:01

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 4 -

1 RA Removing And Installing_replacing Upper Section Of Oil Pan (M62)|Page 617 > < 1 RA Removing And Installing_replacing Upper Section Of Oil Pan (M62)|Page 615