5 Series E39 540i (M62) SAL
Note:
The sealing flange seals the timing case cover via the
solenoid valve.
If necessary, clean solenoid valve with a cloth.
Remove sealing flange (1).
If necessary, remove camshaft sensor or disconnect plug
connection to cable duct.
Release screws and remove timing case cover at top.
Remove rubber sealing strip.
Installation:
Clean groove for rubber profile seal and sealing surfaces of
remains of seal.
Installation:
Replace sealing ring in cylinder head for oil supply of chain
tensioner.
RA Removing and installing timing case cover, top right (M62 VANOS from 9/98)
BMW AG - TIS
20.02.2013 12:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -