5 Series E39 540i (M62) SAL
Press bow cover against the timing chain. Secure bow cover with
a plastic strap (1).
Remove lower timing case cover.
Installation:
Clean and remove grease from sealing surfaces of the engine
block.
Check dowel sleeves (1) for damage and correct installation
position.
Replace seals (2 and 3).
Apply thin coat of Drei Bond 1209 to front and back edges of
seals (refer to BMW Parts Service).
Installation:
Install timing case cover, insert all screws and initially tighten
to approx. 5 Nm.
Firmly tighten all screws in alternate sequence.
Tightening Torque,
refer to Technical Data 11 14 1AZ.
Caution!
Once all screws have been tightened down, retighten them in
a second operation.
Replace radial seal in timing case cover at bottom,
refer to 11 14 141.
RA Removing and installing timing case cover, bottom (M62 VANOS from 9/98)
BMW AG - TIS
20.02.2013 12:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -