5 Series E39 540i (M62) SAL
Note:
Special tool kit 11 6 450 comprises:
Special tool 11 6 451 for cylinder bank 1 to 4
Special tool 11 6 452 for cylinder bank 5 to 8
Align locating bore (1) on sensor gear of cylinder bank 5 to 8
to positioning pin on special tool 11 6 452 . Fit special tool
11 6 452 , insert screws and initially tighten without play. Press
special tool 11 6 452 downwards and align to cylinder head.
Tighten down special tool 11 6 452 .
Caution!
Left-hand threads.
Tighten down nut (1) on sensor gear screw connection.
Tightening torque, 11 36 15AZ
.
Remove special tool 11 6 452 from left cylinder head on
cylinder bank 5 to 8.
Remove special tools 11 2 444 /
11 2 443 /
11 2 445
/
11 2 441 .
RA Adjusting camshaft timing (M62 VANOS from 9/98)
BMW AG - TIS
20.02.2013 12:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 14 -
