5 Series E39 540i (M62) SAL
Note:
In TDC position of first cylinder, marker bores of camshafts
point upwards.
Fit special tool 11 2 446 / 442 to camshafts on cylinder bank
5-8.
Note:
In TDC position of first cylinder, marker bores of camshafts
point upwards.
Note:
When unfastening screw connection on camshaft, brace
camshaft on hex head.
Caution!
Do not damage the cylinder head.
If necessary, machine open-end wrench accordingly.
RA Adjusting camshaft timing (M62 up to 9/98)
BMW AG - TIS
20.02.2013 12:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
