5 Series E39 540i (M62) SAL
Installation:
Install solenoid valve (1).
Clean solenoid valve (1) and sealing face (2).
Installation:
Tighten down solenoid valve with special tool 11 6 420.
Tightening Torque,
refer to Technical Data 11 36 12AZ.
Installation:
Check sealing flange (1), replace if necessary.
Apply a light coat of oil to inside of sealing flange (1) at
sealing face to solenoid valve and carefully install.
Installation:
Insert screws on sealing flange and tighten down.
RA Removing and installing/replacing solenoid valve of camshaft adjustment unit, ri
BMW AG - TIS
20.02.2013 12:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -