5 Series E39 540i (M62) SAL
Note:
In firing TDC position, the inlet camshaft 1 to 4 rotates in the
teeth of the camshaft adjustment unit.
Caution!
This twisting is caused by the position of the cams and is not
an indication for incorrect timing.
Removal:
Removal of the right camshaft adjustment unit is described
separately from installation. Assembly sequence for removal and
installation is different.
Remove oil lines on left and right of cylinder head.
Turn engine in direction of rotation as far as TDC firing position of
first cylinder.
RA Removing and installing/replacing right camshaft adjustment unit (M62 VANOS from
BMW AG - TIS
20.02.2013 12:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -