5 Series E39 540i (M62) SAL
Disconnect vacuum hose (1) from pressure regulator.
Caution!
Catch and dispose of escaping fuel.
Unfasten hose clips (2-5) and remove fuel hoses.
Installation:
Replace fuel lines and hose clips.
Disconnect plug connection (1).
Unfasten nuts (1) and remove 3/2-way valve.
Installation:
Interrogate fault memory of DME control unit, check faults in
memory then cancel fault memory.
RA Removing and installing/replacing 3/2-way valve (M62, M73)
BMW AG - TIS
20.02.2013 13:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
