5 Series E39 540i (M62) SAL
Insert special tool 11 7 310 between engine oil sump and front
axle support.
Turn front wheels so that strain is not placed on central tie rod
when transmission is lowered.
Lower transmission until engine oil sump rests on special tool
11 7 310 .
Lift out retainer (4).
Pull selector rod out of joint and remove washers (5).
Installation:
Grease selector rod.
Grease,
refer to BMW Service Operating Fluids.
Remove retaining clip with a screwdriver.
Withdraw bearing pin and remove selector arm.
Installation:
Grease bearing pin.
Grease,
refer to BMW Service Operating Fluids.
RA Removing and installing transmission (S6S 420G)
BMW AG - TIS
20.02.2013 14:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
