5 Series E39 540i (M62) SAL
Unfasten screws.
Pull transmission backwards and lower.
Installation:
Only fit screws in conjunction with washers.
Tightening torque,
refer to Technical Data 24 00 1AZ.
Installation:
Turn torque converter until special tool 24 2 300 is aligned
with bore in drive plate.
Attach input flange of automatic transmission to output flange
on engine.
Installation:
Bore (1) in drive plate must be accessible from aperture in oil
sump.
Installation:
Screw special tool 24 2 300 into the threaded bore (1).
RA Removing and installing automatic transmission (A5S 440Z)
BMW AG - TIS
20.02.2013 14:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
