5 Series E39 540i (M62) SAL
Support transmission with special tools 00 2 030 / 24 0 170 .
Unclip cable for oxygen sensors from transmission cross-member.
Release screws and remove transmission cross-member.
Tightening torque, 24 71 1AZ / 2AZ.
Remove heat shield (1 ... 2).
Release screws.
Tightening torque, 26 11 1AZ.
Installation:
Replace self-locking nuts.
When tightening screws down, grip each screw while
tightening down its nut. This prevents the flexible disk from
being subjected to torsion stress.
RA Removing and installing automatic transmission (A5S 560Z)
BMW AG - TIS
20.02.2013 14:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -