5 Series E39 540i (M62) SAL
Radial shaft seal on position switch:
Unfasten screws and remove heat shield.
Unscrew screw.
Remove position switch from manual shift valve shaft.
Screw special tool 24 5 260 into radial seal and remove radial
seal by tightening down extractor sleeve.
Installation:
Fit special tool 24 5 490 to the manual shift valve shaft.
Coat sealing lip of new radial seal (1) with transmission oil.
Slide radial seal onto manual shift valve shaft.
RA Replacing radial seal on manual shift valve shaft (A5S 560Z)
BMW AG - TIS
20.02.2013 15:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -