5 Series E39 540i (M62) SAL
31 12 001
Replacing left or right control arm (high)
Caution!
After assembly, measure and adjust front axle alignment.
Remove front wheel,
refer to 36 10 300.
Remove stabilizer link.
Installation:
Replace self-locking nut. Tightening Torque,
refer to Technical Data 31 35 11AZ.
Caution!
Mark the installation position of the spring strut tube (1) in the
swivel bearing (2) with paint - never mark with scribing tool.
Marking is not required if the factory mark is still identifiable.
R = installation position of right spring strut tube
L = installation position of left spring strut tube
Version with factory marking above the swivel bearing.
RA Replacing left or right control arm (high)
BMW AG - TIS
20.02.2013 15:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
