5 Series E39 540i (M62) SAL
Important!
Do not release spring strut from swivel bearing with rotary
motions.
With a screwdriver or pry bar, press spring strut shock absorber
out of swivel bearing.
Important!
Do not unfasten spring strut shock absorber from swivel
bearing with turning motion - this can cause damage (radial
notches) to the spring strut shock absorber.
Warning!
Prior to each use of the special tool 31 3 340 , it is essential
to read the associated Owner's Handbook fully!
All the safety precautions and instructions contained in the
Owner's Handbook must be strictly observed!
Failure to observe these safety precautions and instructions
increases the risk of serious physical injury, damage to your
health and damage to property and equipment!
Important!
1.
Prior to each use, check the special tools for defects,
modifications and operational reliability.
2.
Damaged/modified special tools must not be used!
3.
No changes or modifications may be made to the special
tools!
4.
These special tools are intended solely for the purpose
of tightening and relieving cylindrical and tapered
suspension springs.
5.
Keep special tools dry, clean and (down to the spindle)
free from grease.
6.
Impact screwdrivers are prohibited!
7.
Do not compress coil spring to full extent.
RA Replacing front left or right spring strut shock absorber (high)
BMW AG - TIS
20.02.2013 15:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
