5 Series E39 540i (M62) SAL
32 00 610
Adjusting front axle (with KDS) (high)
Caution!
On cars equipped with Electronic Damper Control, it is
essential after wheel alignment to perform a "steering angle
check/adjustment" with the BMW Diagnosis System.
Adjust toe and toe-difference angle.
Move steering gear into straight-ahead setting (marks on housing
and steering shaft).
Loosen clamping screws on track rods.
Adjust toe-in of wheel by turning the track rod precisely to nominal
value, refer to Technical Data.
Installation:
Ensure that the ball joints are not twisted.
Tightening Torque,
refer to Technical Data 32 21 4AZ.
RA Adjusting front axle (with KDS) (high)
BMW AG - TIS
20.02.2013 15:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -