5 Series E39 540i (M62) SAL
When installing a new rear window:
Caution!
Static charge!
Unroll protective foil on outside and inside, do not pull off.
Remove glue residue in body cutout to approx. 0.5 mm
thickness.
Note:
Cut off old glue carefully with a heavy-duty scalpel to avoid
damaging the paint finish in body cutout.
Caution!
Clean freshly cut residual bead with alcohol only.
Do not under any circumstances use Sika bonding
agent 205/5 or glass primer 205/5.
Place rear window on a suitable surface (support pedestals) with
inside facing upwards.
When reusing the rear window:
Remove residual glue on rear window with a heavy-duty scalpel
(1) to approx. 0.5 mm.
RA Removing and installing rear window (Protection)
BMW AG - TIS
20.02.2013 20:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -