5 Series E39 540i (M62) SAL
Installation:
Place power window in locating bracket (1) and insert all
screws loose.
Note installation position of nut (2).
Installation:
Tighten screws (1) and (2).
Tightening torque,
refer to Technical Data 51 33 2AZ.
Installation:
Install door window glass and locate with clamping jaw (1) and
clamping screw (2).
Adjust door window glass,
refer to 51 32 154.
Installation:
Lower door window down to stop.
Tighten screws (1).
Tightening torque,
refer to Technical Data 51 33 2AZ.
RA Removing and installing power window in front door, left or right (Protection)
BMW AG - TIS
20.02.2013 20:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
