bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing_replacing Cover (trapping Protection) On Door Window Fra > < 2 RA Removing And Installing Power Window In Front Door, Left Or Right (Protection)|Page 2429
Page 1
background image

51 34 ...

Removing and installing/replacing cover on
fixed door window of rear door, inside left or
right

Remove rear door trim,

refer to 51 42 000.

Remove window cavity trim from inside of rear door,

refer to 51 22 330.

Open rear door window.

Lever out cover (1) at bottom/rear with special
tool 00 9 321 (fishbone) and remove towards front.

Installation:

First position cover (1) on side (A), press upwards (B) against
cover (2) on door window frame and then snap into place at
rear (C).

RA  Removing and installing/replacing cover on fixed door window of rear door, insid

BMW AG - TIS

20.02.2013  20:18

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Removing And Installing_replacing Cover (trapping Protection) On Door Window Fra > < 2 RA Removing And Installing Power Window In Front Door, Left Or Right (Protection)|Page 2429