bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing Door Trim Panel, Front Left Or Right (Protection)|Page 2466 > < 1 RA Replacing Protective Mat For Door Handle, Front Left Or Right (Protection)
Page 1
background image

51 41 000

Removing and installing door trim panel, front
left or right (Protection)

Unfasten screw (1) in air duct.

If necessary lift out footwell light (2) and remove connector.

Version with seat memory:

If necessary, lift out memory switch (3) and remove connector.

Remove toggle switch (1) for side-window operation,

refer to 61 31 115.

Lift out seal cap (2) and unfasten screw.

Unclip door trim panel all around.

Pull door trim upwards out of door clip and slide door handle (1)
through the door trim.

Note:

Do not put down door trim panel. First detach wiring harness
underneath protective mat.

RA  Removing and installing door trim panel, front left or right (Protection)

BMW AG - TIS

20.02.2013  20:28

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Removing And Installing Door Trim Panel, Front Left Or Right (Protection)|Page 2466 > < 1 RA Replacing Protective Mat For Door Handle, Front Left Or Right (Protection)